Creating Parameter Files; Sample Tube - Micromeritics ASAP 2020 Confirm Operator's Manual

Creating Parameter Files

Creating Parameter Files
An Analyst is not authorized to create parameter files.
The following file types can exist as part of the sample information file, as well as individual
parameter files:

• Sample tube

• Degas conditions
• Analysis conditions
• Adsorptive properties
• Report options
Having these files exist independently allows you to use them over and over again.
Several predefined parameter files are included with the ASAP 2020 Confirm program.
Although these files may come close to the needs of your laboratory, you may wish to define
additional ones. Or you can use a predefined file as a starting point. You can do this by
creating a new file and then selecting
the existing parameter file. Then you can make any changes you need to make and the played.
Sample Tube
Sample Tube files contain specifics about the sample tube used in the analysis.
1. Select New, Sample Tube from the File menu; the Create a Sample Tube File dialog
containing the available templates is displayed.
2. Choose a template, then click
3. Enter a description in the Sample Tube field. Be sure to use an intuitive description so that
you can recognize it easily.
202-42811-01 - Mar 2011
. A dialog is displayed so that you can select
Replace
; the Sample Tube dialog is displayed.
Create
ASAP 2020 Confirm
3-3