Save To File; Load From File - Micromeritics ASAP 2020 Confirm Operator's Manual

Calibration

Save to File

Use this option to save the current calibration settings to a file; the Select Calibration File dia-
log is displayed.
File name

Load from File

Displays the Select Calibration File dialog (shown above) so that you can load a previously
saved calibration file.
202-42811-01 - Mar 2011
Defaults to the next sequence number for calibration files.
The sequence number consists of: xxx-yyy.CAL, where xxx
= serial number of unit and yyy = sequence number. For
example, the number listed in the above dialog represents
the first calibration file for unit serial number 202.
ASAP 2020 Confirm
5-25