Micromeritics ASAP 2020 Confirm Operator's Manual page 227

Regression Report
X- and Y-Axes
Variable fields
Axis Range
Autoscale
Recalculate archived
SPC results
Tabular report
Label data
Samples
202-42811-01 - Mar 2008
Allows you to designate the X- and Y-axes variables. Click
on the down arrow to display a list of variables. The variables
in this list are the ones you specified in the SPC report
options.
With this option, you can plot the regression of up to three Y-
axis variables against the X-axis variable. The X-axis
specifies the independent variable for the regression, while
the Y-axes provide the dependent variables.
Enables you to specify the beginning and ending values for
the X- and Y-axis ranges. Data collected outside these ranges
are not included in the plot. These fields are disabled if you
choose Autoscale.
Allows you to have the X- and/or Y-axes scaled
automatically. When scaled automatically, both axes begin at
zero. The analysis program uses the highest values collected
during analysis as the ending points.
Select this option to have archived SPC values recalculated.
This ensures that any changes made to the SPC Report
Options are included in the new report; however, it does
lengthen the time required to generate the report.
Enables you to generate tabular, as well as graphical, data of
the included samples. A tabular report contains the numeric
values contributed by each sample.
Allows you to label the points on the plot to correspond with
the values in the sample files.
Displays the Regression Report Sample Selection dialog,
allowing you to choose the sample files you wish to have
reported.
ASAP 2020 Confirm
6-9