Log In; Log Out - Micromeritics ASAP 2020 Confirm Operator's Manual

Log In

Log In
Log in enables you to log into the application; the User Log in dialog is displayed.
Simply enter your user name and password, then click O
User name
Password
Change password

Log Out

Select this option to log out of the system. If files are open and contain changes that have not
been saved, you are prompted to save or discard them before log out is completed.
202-42811-01 - Mar 2011
Typically in this field, you should enter your Windows User
name, unless your Administrator has specified a different
user name.
Enter your password. If you enter your password incorrectly
a specified number of times (your Administrator determines
the number when setting up system options; the default is
three), the application will lock and you will not be allowed
to proceed. Contact the Administrator to unlock the
application and assign a new password.
The first time you log into the application after the Confirm
software is installed, you will be prompted to change your
password to one of personal preference. You must enter at
least six characters.
Select this option to change your password after you have
logged in; the Set password dialog allowing you to change
your password is displayed.
ASAP 2020 Confirm
.
K
4-109