Report Options - Micromeritics AccuPyc 1330 Operator's Manual

Editing the Setup Parameters

Report Options

Press
Both density and volume will be shown on the printed report, but density
will be correct only if sample weight was entered.
4-22
2 to display or edit report options.
Display
Set-up type?
Report options
Anls display mode?
Density
Request sample ID?
Yes
Transmission format?
Single column
Report destination?
Display
Entry
Press until Report options is
CHOICE
displayed. Then press
Select the mode, either density or volume,
in which the analysis report will be
displayed, then press
ENTER
A sample ID is a unique identifier of the
sample. It can contain from 1 to 20
numbers or dashes.
Using sample IDs can help you keep track
of data from various analyses.
For example, you can use the sample ID as
a date and time stamp.
Select either yes or no, then press
Select the format of data to be used when
transmitting reports. Refer to Appendix D
for a description of the formats.
Choices: Single column, Spreadsheet
Select the destination of the report that is
automatically generated after an analysis or
calibration, then press
Choices: display, printer, transmission line.
AccuPyc 1330
.
ENTER
.
ENTER
ENTER .
September 1996