Micromeritics ASAP 2020 Confirm Operator's Manual page 162

ASAP 2020 Confirm
Halsey
Pressure Range
Selected Reports
4-86
Displays the Halsey Thickness Equation dialog.
You can edit the values for the multiplier, numerator, and
exponent.The range for a selected field is shown in the
information bar at the bottom of the dialog.
Refer to CALCULATIONS, page C-1, for additional
information.
Displays the Report Relative Pressure Range dialog so that
you may specify minimum and maximum relative pressures
to use with this report.
• If Use calculation assignments is not selected on the
Collected/Entered dialog, all of the nonoutlier points of
the collected data within the specified range are used for
calculating the data for this report.
• If Use calculation assignments is selected, collected data
points which are assigned to this report type are used.
Lists the available MP-Method reports. Choose a report by
double-clicking on the report name or highlight the report
name and press the
Spacebar
preceded with a check mark.
The following reports are available:
• Tabular Report
• Cumulative Pore Volume
• dV/dw Pore Volume
• Cumulative Pore Area
• dA/dw Pore Area
. A report is selected when it is
202-42811-01 - Mar 2011
New