Error Messages; 2200 And 2300 Series - Micromeritics ASAP 2020 Confirm Operator's Manual

Appendix B
Error messages are listed numerically. If the Action response instructs you to contact your
service representative, record the error message and make backup copies of any files involved
in the operation.
The 1000-series error messages (used primarily for software testing) are not
included in this appendix. These errors should not occur during normal operation.
If you receive a 1000 series error message or an error message not listed in this
appendix: record the error message, make backup copies of any files involved,
then contact your service representative.

2200 and 2300 Series

2201- Cannot execute report subsystem.
Cause:
Action:
2331- Logged-in Windows user is not an application user.
Cause:
Action A:
Action B:
202-42811-01 - Mar 2011
B. ERROR MESSAGES
Start Report failed to execute the report subsystem (which is a separate
process).
Restart the computer. If the problem persists, reinstall the application
(this will not affect any of your sample files). If the problem continues,
contact a Micromeritics service representative.
You attempted to log into the application but the user logged into Win-
dows is not an application user.
Close the application, restart Windows, and log in as the windows user.
Then log into the application.
your Administrator to assign application rights to the current
Contact
logged-in
Windows user.
ASAP 2020 Confirm
B-1