Micromeritics ASAP 2020 Confirm Operator's Manual page 141

New
Tabular Report
The BJH Adsorption/Desorption tabular report allows you to specify the method of data
reduction.
You can measure pore width, diameter, or radius; pore size can be expressed in
angstroms or nanometers. Select Options > Units to specify desired units.
Fixed pore size table
Collected points
Columns
202-42811-01 - Mar 2011
Select this option to specify exact pore sizes for which
volume or area data are reported. Only the pore sizes within
the specified range appear on the report. Click
(or edit) a fixed pore size table.
Select this option to include in the report calculations the
values collected by the system.
Displays the BJH Adsorption (or Desorption) Tabular Report
column Options dialog, allowing you to select up to six
columns of data for the tabular report.
The default column title appears next to the column number.
Each column includes a pull-down list of the data types to
include in the report; the pore width, radius, or diameter can
be measured (select Options > Units to choose desired unit).
ASAP 2020 Confirm
to enter
Table
4-65