Show Instrument Log - Micromeritics ASAP 2020 Confirm Operator's Manual

ASAP 2020 Confirm

Show Instrument Log

Displays a log of recent analyses, calibrations, and errors or messages.
By default, this information is logged for a 60-day period for analyses and messages, and a
90-day period for calibrations. A Developer can change the time for which Analyses, Cali-
brations, and/or Messages are retained by making an entry in the Unit section of the CFR
2020.INI file located in the Status directory; the entry is formatted as follows:
Analysis=60
Calibration=90
Messages=60
Simply replace the default value with the desired number.
Analysis
Calibration
Messages
Add Log Entry
5-14
These options allow you to choose which entries are dis-
played in the window. For example, select the Calibration
check box to display only calibration information.
Enables you to make an entry in the instrument log that can-
not be recorded automatically through the application
software. For example, you may change the port filter. The
field adjacent to the push button allows you to enter the
operation; the push button is enabled when you make an
entry in the field, allowing you to add the entry.
Show Instrument Log
202-42811-01 - Mar 2011