Micromeritics ASAP 2020 Confirm Operator's Manual page 315

Appendix B
2521- Unable to program controller.
Cause:
Action:
2522- Invalid controller application file.
Cause:
Action:
2523- Programming the controller failed.
2524- CRC check failed on programming controller.
2525- Unknown error programming controller.
2526- Controller download was not successful.
2527- Controller CRC error on boot block.
2528- Controller DRAM error.
2529- Controller Com1: error.
2530- Controller Com2: error.
2531- Controller debug port error.
Cause:
Action:
2532- The instrument contains a different software version. Do you want to reset it?
Cause:
Action:
2533- Analyzer initialization failed.
Cause:
Action:
202-42811-01 - Mar 2011
A hardware malfunction has occurred.
Contact your local Micromeritics service representative.
The application's control file has been corrupted or deleted.
Reinstall the ASAP 2020 analysis program.
An internal processing and/or hardware error has occurred.
Contact your service representative if you continue to receive this error
message.
The application has discovered a different version of software operat-
ing in the analyzer.
If there are no analyzers other than the ASAP 2020 connected to the
computer, select and allow the updated software to load.
Yes
An internal processing and/or hardware error has occurred.
Contact your service representative if you continue to receive this error
message.
ASAP 2020 Confirm
B-21