Micromeritics ASAP 2020 Confirm Operator's Manual page 175

Save As
• save a parameter file in the active window with a different name. The parameter file
must be of the same type; for example, you can save an Analysis conditions file only as
another Analysis conditions file.
When you save as a parameter file, this type of dialog is displayed.
Enter a description in the ID field; you can use up to 50 characters. If the Save push
button does not become enabled, a file with the same description already exists. The
confirm program disallows duplicate file descriptions. Edit the description to enable the
Save push button.
• save a subset (parameter) of the sample file in the active window as a standalone
parameter file. For example, select Analysis Conditions from the Save As menu to create
a standalone parameter file of the analysis conditions portion of the active sample file.
When you save a subset of a sample as a parameter file, the same type of dialog as
shown above is displayed.
• save as an ASCII file the relative pressures and corresponding thicknesses (t-Curve)
from the collected data. These data are derived by dividing the condensed volume of
adsorptive by the selected surface area. The density conversion factor in the adsorptive
properties file is used to convert quantity adsorbed to volume of condensed adsorptive.
• save as an ASCII file the relative pressures and resulting quantities adsorbed (Alpha-S)
from the collected data. These data are derived by taking the isotherm and dividing it by
the quantity adsorbed at 0.4 relative pressure.
202-42811-01 - Mar 2011
ASAP 2020 Confirm
4-99