2400 Series - Micromeritics ASAP 2020 Confirm Operator's Manual

ASAP 2020 Confirm

2400 Series

2401- FATAL ERROR: (error message).
Cause:
Action:
2430- Error accessing file (file name), error code = (number).
Cause A:
Action A:
Cause B:
Action B:
Cause C:
Action C:
2431- Error writing file (file name), error code = (number).
Cause:
Action:
B-6
An internal processing and/or hardware error has occurred.
Contact your service representative if you continue to receive this error
message.
Hard disk may be damaged.
Run system diagnostics.
Diskette may be damaged.
Clean the diskette drive. If this does not eliminate the problem, attempt
operation using a backup copy of the file.
A software error occurred when the file was accessed.
Contact your service representative.
The hard disk does not have enough space left to perform the opera-
tion.
Copy files not used regularly from the hard disk to diskette, delete
them from the hard disk, and then try the operation again.
Appendix B
202-42811-01 - Mar 2011