Micromeritics ASAP 2020 Confirm Operator's Manual page 134

ASAP 2020 Confirm
Open
Save As
Fitted alpha-S Range
Ref. surface area
Relative pressure range
Tabular report
Alpha-S plot
Overlay samples
Autoscale x-axis
Autoscale y-axis
4-58
Allows you to import the values from an existing alpha-s
curve (ALS) into the table. One predefined curve is shipped
with the analysis program. After the values are copied into
the table, you may edit them if desired. Editing these values
will not affect the file from which they were copied.
Enables you to save the current table of values under a file
name.
Provides two fields for entering the minimum and maximum
relative pressures from which the fit will be determined.
Enables you to enter the surface area from the reference
curve. This value is used to calculate the sample surface area.
Provides two fields for entering a pressure range when
calculation assignments are not used.
Select this option to generate collected data in a tabular
manner.
Select this option to generate collected data graphically.
Allows you to overlay data from the current sample file with
data from other sample file(s). The other sample file(s) are
chosen by clicking
Overlays
screen.
Select these options to have the X- and/or Y-axes scaled
automatically.
Both X- and Y-axes begin at zero; the system uses the highest
values collected during analysis as the ending points.
If you choose not to autoscale data, the From and To fields
are enabled, allowing you to enter the ranges.
on the main Report Options
202-42811-01 - Mar 2011
New