Micromeritics ASAP 2020 Confirm Operator's Manual page 314

ASAP 2020 Confirm
2513- Unable to read the calibration file (file name).
Cause:
Action:
2514- Unable to write the calibration file (file name).
Cause:
Action A:
Action B:
2515- Warning: Changing the calibration information will affect the performance of
the instrument. Only qualified service personnel should do this. Do you wish to
proceed?
Cause:
Action:
2516- Warning: Keeping a backup copy of the calibration data is recommended by
Micromeritics. Would you like to do so now?
Cause:
Action:
2517- Canceling this dialog will reset the calibration state to what it was when this
dialog was first opened. Are you sure you want to cancel?
Cause:
Action:
B-20
You selected an invalid calibration file or one that cannot be read.
Be sure the media containing the alleged calibration file has no prob-
lems.
An attempt to Save calibration data has failed due to possible media
problems.
Be sure the media containing the alleged calibration file has no prob-
lems.
Choose an alternate media to Save the calibration data.
You have started the process of performing a calibration operation.
Calibration operations should only be done by or under the direction of
qualified service personnel.
You have performed a calibration operation; a backup copy is recom-
mended.
Perform a calibration
Save
You have not accepted the calibration you performed.
If the calibration operation was successful, press
operation.
Accept
202-42811-01 - Mar 2011
Appendix B
.