Asap Series Sample Data Worksheet - Micromeritics ASAP 2020 Confirm Operator's Manual

ASAP Series Sample Data Worksheet

This form is provided to assist you in obtaining an accurate sample mass for report calculations. You may
use the After Degas value (Step 5) or the After Analysis value (Step 7), provided they are close to the
same.
Sample tube:_____________________
Before Degas:
1. Mass of empty sample tube
2. Mass of sample tube plus sample
3. Mass of sample (Step 2) – (Step 1)
After Degas:
4. Mass of sample tube plus sample
5. Mass of sample (Step 4) – (Step 1)
After Analysis:
6. Mass of sample tube plus sample (g)
7. Mass of sample (Step 6) – (Step 1)
Compare the sample mass obtained after analysis (Step 7) with the sample mass after degas (Step 5).
These two values should be close in range. If a significant difference is noted, analysis problems may
exist or the sample may have been improperly degassed.
Sample: _______________________________
________ g
________ g
________ g
________ g
________ g
________ g
________ g