Degas Conditions - Micromeritics ASAP 2020 Confirm Operator's Manual

ASAP 2020 Confirm

Degas Conditions

The fields on this dialog are used for specifying degas conditions when your ASAP 2020 is
equipped with the SmartVac degas option. If you do not have the SmartVac, the values you
enter are meaningless.
Description
Replace
Evacuation Phase
group box
Temperature ramp rate
4-14
Displays a description of the current Degas Conditions
template. Enter a new description or add to the existing
if desired.
Be sure to use an intuitive name so that it can be easily
recognized when needed.
Range: 40 alphanumeric characters
Use this push button to replace the current degas conditions
with those from an existing Degas Conditions file. The Open
Degas Conditions File dialog allowing you to choose a file is
displayed.
The options in this group box allow you to specify
conditions for the evacuation phase of the degassing
operation.
Allows you to specify the rate at which the temperature is to
change while advancing to the target temperature during
evacuation.
New
one
202-42811-01 - Mar 2011