Exit - Micromeritics ASAP 2020 Confirm Operator's Manual

ASAP 2020 Confirm

Exit

Exit enables you to exit (close) the ASAP 2020 confirm program.
• If a window containing a modified file is open, the following message is displayed:
(file name) has been changed. Save changes before closing?
Yes
Click
closes.
Click
Click
• If an analysis is in progress, the following message is displayed:
2459- An analyzer is busy. A delay in restarting this application
could result in loss of new data. continue with program exit?
Click
analysis data are collected and stored in the analyzer's memory.
Click
Although data are stored in the analyzer when you exit the program during analysis,
they are not saved in the file until the program is restarted. At that time the data are
saved automatically. If a power failure occurs in the interim and you do not have an
Uninterruptible Power Supply (UPS) attached, loss of data will result.
If a report is in progress, you are cautioned that reports are being generated, and given the
opportunity to either cancel the print job or allow the reports to print before exiting.
4-110
No
; a dialog prompting for a reason for the change is displayed before the file
Yes
to close the file without saving the changes.
No
to return to the active file.
Cancel
Yes
to exit the analysis program but the analysis will continue until completion;
Yes
to allow the analysis program to remain active and the analysis to finish
No
Cancel
No
Exit
202-42811-01 - Mar 2011