Micromeritics ASAP 2020 Confirm Operator's Manual page 312

ASAP 2020 Confirm
2504- Cannot create output file for sample (sample name).
Cause:
Action:
2505- Error Logger cannot be initialized! Error code (number). Program will exit.
Cause:
Action:
2506- (sample file) Output device (name) is not installed. Printing cannot be
accomplished.
Cause:
Action:
2508- (sample file) Overlay file (name) was not found. It will not be included in the
reports.
Cause:
Action:
2509- (sample file) Error opening file (name): (error). Reports cannot be produced.
Cause:
Action:
B-18
Insufficient space may be available on the hard disk.
Ensure that sufficient space is available. Contact your service repre-
sentative if you continue to receive this error message.
An internal processing and/or hardware error has occurred.
Contact your service representative.
The selected output device is not installed in Windows.
Select a different output device in the System Configuration dialog
box. Install the device using the Control Panel, Printers operation.
The specified overlay file could not be found.
Ensure that the file specified as an overlay does exist.
An error occurred while the program was opening a file necessary to
the report operation.
Use the name given in the error message to investigate. Contact your
service representative if you continue to receive this error message.
Appendix B
202-42811-01 - Mar 2011