Micromeritics ASAP 2020 Confirm Operator's Manual page 326

ASAP 2020 Confirm
4033- Not enough points to generate Dubinin Tabular Report.
Cause:
Action:
4034- Fewer than 2 points available for Dubinin calculations.
Cause:
Action:
4035- Cannot calculate optimized Astakhov exponent: Not enough points with a rel-
ative pressure in the range [(pressure), (pressure)].
Cause:
Action:
4036- Fewer than 2 points available for Horvath-Kawazoe calculations.
Cause:
Action:
B-32
There are fewer than two data points selected for the Dubinin tabular
reports.
Examine the calculation assignments in the Collected Data dialog of
the sample file. You must have at least two micropore pressures
selected for inclusion in the Dubinin report.
There are fewer than two data points selected for Dubinin reports in
one of the sample files selected.
Examine the calculation assignments in the Collected Data dialog of
the sample file. You must have at least two micropore pressures
selected for inclusion in the Dubinin report.
There are fewer than two valid data points in the relative pressure
range specified. Astakhov reports will not be produced.
Examine the calculation assignments in the Collected Data dialog for
the sample file. You must have at least two pressures in the given range
selected for inclusion in the Dubinin report.
You must select at least two data points for inclusion in the Horvath-
Kawazoe analysis on the Collected Data dialog. No report will be pro-
duced.
From the Collected Data dialog, select the data points to be analyzed.
Appendix B
202-42811-01 - Mar 2011