Micromeritics ASAP 2020 Confirm Operator's Manual page 84

ASAP 2020 Confirm
Operator
Submitter
Bar Code
Mass
Enter
Calculate
Density
Type of Data
4-8
Enter the name of the operator (analyst) who will be using
this file to perform the analysis and the name of the person
(or department) submitting the sample for analysis. You can
use up to 40 characters in each field.
This field enables you to enter bar code information. If bar
code information is not used, you can use this field to enter
additional information about the sample; for example, you
may wish to enter the lot number of your sample. This field
can also be omitted in Sample Defaults if it is not needed.
This field will also accept data from a bar code reader.
Range: 40 characters
The mass choices default to those specified in the template;
edit the value if desired
Enables the Sample Mass field allowing you to enter a value.
Enables the Empty tube and Sample + tube fields, allowing
you to enter appropriate values. These values are used to
calculate the mass of the sample,
Mass = Mass
sample
If you plan to use a calculated free space, enter the sample's
density in this field. A value in this field is ignored for
measured or entered free spaces.
Choose whether you wish to enter the data or have it
collected automatically by the analysis program. If you
choose Manually entered, an "Entered" tab is added so that
you may enter the desired data. You cannot enter data if you
are creating the file on a computer that is not attached to the
analyzer.
– Mass
sample + tube tube
202-42811-01 - Mar 2011
New