Chapter 11
PCLK01=PCLK0/2
PCLK02=PCLK0/4
344
Downloaded from
Elcodis.com
electronic components distributor
11.2 Functions
TMPn has the following functions.
• Interval timer
• External event counter
• External trigger pulse output
• One-shot pulse output
• PWM output
• Free-running timer
• Pulse width measurement
• TMP0 and TMP1 can be used for triggering the DMA Controller.
• All TMPn can be optionally stopped when a breakpoint is hit during
debugging (refer to "On-Chip Debug Unit" on page 877).
11.3 Configuration
TMPn includes the following hardware.
PCLK0 (16 MHz)
Note
(8 MHz)
Note
(4 MHz)
PCLK4 (1 MHz)
PCLK5 (500 KHz)
PCLK6 (250 KHz)
PCLK7 (125 KHz)
TIPn0
TIPn1
Figure 11-1
Block diagram of TMPn
Preliminary User's Manual U17566EE1V2UM00
16-bit Timer/Event Counter P (TMP)
Internal bus
TPnCNT
16-bit counter
CCR0
buffer
register
CCR1
buffer
register
TPnCCR0
TPnCCR1
Internal bus
INTTPnOV
Clear
TPn0
TPn1
INTTPnCC0
INTTPnCC1