ABB IRB 6600 - 175/2.55 User Manual page 669

3.0.5 Reading the SIS output logs
General
Whenever a set condition has expired (e.g. max allowed operation time before service), a
message to this effect will be shown in the Operational log.
Access to logs How to open any log and show its contents is detailed in the "User's Guide", chapter "Ser-
vice".
Available mes-
The following messages may be shown:
sages
Available in:
Calendar time
Calendar time
Operation time
Operation time
Gearbox time
Gearbox time
3HAC 16246-1
3 Service Information System (SIS)
SIS message in
Meaning
Operational log
Service Message The manually set calendar time limit has expired.
How to set the limit is detailed in section Setting
Service is due!
the SIS parameters on page 33.
X calendar days since
Proceed with the required service as detailed in
last service.
the Repair Manual or Maintenance Manual
depending on which type of service.
Service Message X number of calendar days remain until the manu-
ally set calendar time limit expires.
X calendar days to
next service. How to set the value determining when the mes-
sage is to be shown, is detailed in section Setting
the SIS parameters on page 33.
Service Message The manually set operation time limit has expired.
How to set the limit is detailed in section Setting
Service is due!
the SIS parameters on page 33.
X production hours
Proceed with the required service as detailed in
since last service.
the Repair Manual or Maintenance Manual
depending on which type of service.
Service Message X number of operation hours remain until the man-
ually set operation time limit expires.
X production hours to
next service. How to set the value determining when the mes-
sage is to be shown, is detailed in section Setting
the SIS parameters on page 33.
Service Message The automatically calculated gearbox time limit
has expired.
Gearbox x requires
service! Proceed with the required service as detailed in
the Repair Manual or Maintenance Manual
depending on which type of service.
Service Message X percent of gearbox hours remain until the auto-
matically calculated gearbox time limit expires.
X% of the service inter-
val has expired for How to set the value determining when the mes-
gearbox x! sage is to be shown, is detailed in section Setting
the SIS parameters on page 33.
A
3.0.5 Reading the SIS output logs
35