ABB IRB 6600 - 175/2.55 User Manual page 364

8 Robot controller
8.0.6 Service Settings Window
8.0.6 Service Settings Window
When is it
The Service Settings window will be displayed when Service Settings is pressed in the Net-
shown?
work Settings window as shown in the figure in section "Network Settings".
en0100000257
OK
Service Setting
Parameter
IP (service setting) The IP Address for the I/O Computer
IP
Subnet mask
Gateway
162
returns to the Start window as shown in the figure in section "Start Win-
dow".
Description
Required to configure your PC's network settings for
communication between RobInstall and the I/O Computer.
Required to configure your PC's network settings for
communication between RobInstall and the I/O Computer.
Required to configure your PC's network settings for
communication between RobInstall and the I/O Computer.
A 3HAC 16245-1