ABB IRB 6600 - 175/2.55 User Manual page 664

3 Service Information System (SIS)
3.0.3 Defining the SIS input parameters
3.0.3 Defining the SIS input parameters
General
This section details the parameters that may be set with estimated values. The values can be
defined by the operating organization as knowledge of the robot's working conditions are
accumulated.
Since the counters are to be used for purposes defined by the user, ABB cannot give any
recommendations regarding their definitions.
The figure below shows the options of parameters to be set.
en0200000049
Operation time
The number of operation hours selected as service interval.
limit (service
E.g. by setting the value "20,000", the SIS will save this as the nominal time for activating
level)
the alarm, not counting the percentage described below.
en0200000054
30 A 3HAC 16246-1