ABB IRB 6600 - 175/2.55 User Manual page 360

8 Robot controller
8.0.2 Start window
8.0.2 Start window
When is it
shown?
xx0100000168
The start window displays the start menu and will appear in the following cases:
Possible actions
From this window you can choose to do one of the following:
Restart the
The BootImage will be re-executed, used to apply changes in the system settings (see section
system, Reboot
"Reboot").
Load a system (See section 4.4)
from diskettes,
Boot Disks
Set the network Set network settings for Main Computer or check how to configure your PC (see section
settings, Network
"Network Settings").
Settings
Choose a system If there are one or more systems in the mass storage memory, you can choose to activate one
from the mass
of them (see section "Select System).
storage memory,
Select System
158
• When no controller operating system is installed at power on.
• After X-START (see section "X-start").
• After C-START (see section "C-start").
A 3HAC 16245-1