ABB IRB 6600 - 175/2.55 User Manual page 434

2 Reference information
2.1.4 Standard toolkit
2.1.4 Standard toolkit
General
All service (repairs, maintenance and installation) instructions contain lists of tools required
to perform the specified activity.
All special tools required are listed directly in the instructions while all the tools that are
considered standard are gathered in the Standard toolkit and defined in the table below.
In this way, the tools required are the sum of the Standard Toolkit and any tools listed in the
instruction.
Contents,
standard toolkit,
3HAC 15571-1 Qty
1
1
1
1
1
1
1
2
1
1
1
18
Art. no. Tool
- Ring-open-end spanner 8-19mm
- Socket head cap 5-17mm
- Torx socket no:20-60
- Box spanner set
- Torque wrench 10-100Nm
- Torque wrench 75-400Nm
- Ratchet head for torque wrench 1/2
- Hexagon-headed screw M10x100
- Socket head cap no:14, socket 40mm bit L 100mm
- Socket head cap no:14, socket 40mm bit L 20mm To be shorted to
- Socket head cap no:6, socket 40mm bit L 145mm
A
Rem.
12mm
3HAC 16247-1