ABB IRB 6600 - 175/2.55 User Manual page 224

2 Reference information
2.1.4 Standard toolkit
2.1.4 Standard toolkit
General
All service (repairs, maintenance and installation) instructions contain lists of tools required
to perform the specified activity.
All special tools required are listed directly in the instructions while all the tools that are
considered standard are gathered in the Standard toolkit and defined in the table below.
In this way, the tools required are the sum of the Standard Toolkit and any tools listed in the
instruction.
Contents,
standard toolkit,
3HAC 15571-1 Qty
1
1
1
1
1
1
1
2
1
1
1
22
Tool
Ring-open-end spanner 8-19mm
Socket head cap 5-17mm
Torx socket no:20-60
Box spanner set
Torque wrench 10-100Nm
Torque wrench 75-400Nm
Ratchet head for torque wrench 1/2
Hexagon-headed screw M10x100
Socket head cap no:14, socket 40mm bit L 100mm
Socket head cap no:14, socket 40mm bit L 20mm
Socket head cap no:6, socket 40mm bit L 145mm
A
Rem.
To be shorted to 12mm
3HAC 16245-1