ABB IRB 6600 - 175/2.55 User Manual page 659

Calendar time
This is a clock within the control system that enables you to set a specific service interval,
based on calendar time:
xx0200000035
After this time, a message is accessible on the Tech Pendant Unit (TPU). How to access this
is detailed in section Reading the SIS output logs on page 35.
Prev service
Elapsed time
Next service
Remaining time
Operation time
This is a function within the control system that counts the amount of time the "MOTORS
ON" signal is active, i.e. the amount of time the robot is in the operational mode.
xx0200000036
After this time, a message is accessible on the Teach Pendant Unit (TPU). How to access this
is detailed in section Reading the SIS output logs on page 35.
Service interval
Elapsed time
Remaining time
3HAC 16246-1
3 Service Information System (SIS)
Date when the counter was reset last time, i.e. after the last service. This
date was entered manually as detailed in section Setting the SIS param-
eters on page 33.
Elapsed time since the counter was reset the last time.
Date when next scheduled service is planned. This date is entered man-
ually as detailed in section Setting the SIS parameters on page 33.
Remaining time to next scheduled service date.
The specified service interval until another service will be required. This
parameter was entered manually as detailed in section Setting the SIS
parameters on page 33.
Operation time since the service interval was set the last time.
Remaining operation time until the time set in service interval has
expired.
A
3.0.2 Service Information System (SIS)
25