Deleting A File; Editing Operations - Mitsubishi Electric 700 Series Training Manual

4. Edit Screens

4.2.5 Deleting a File

Operation method
(1) Press the menu
Memory HD
(2) Select a device.
(Ex.) Menu
(3) Use the
,
the cursor with target machining program.
The name of the machining program to be
deleted can be input in the input area.
(4) Press the
INPUT key.
(5) Press the
Y or
Press the N
(Note) The file is not deleted in the following cases.
• The file that is to be deleted is currently being used in automatic operation.
• The file that is to be deleted is subject to edit lock B or C.
• Data protection key 3 is enabled.
• The file to be deleted is in the "program restarting" state.

4.2.6 Editing Operations

When the program is edited, the key input data is directly written into the program display area. All data is
overwritten from the cursor position. "Editing" appears on the right side of the file name display once input is
started.
Press the INPUT key to save the program to the device and clear the " editing " message.
The editing operations from when the file is actually opened are explained in the following sections.
These editing operations are common for the machining program and MDI program.
CAUTION
If "there is no value after the G" command, the operation will be the "G00" operation when the
program is run due to key chattering, etc., during editing.
Erase file .
Memory
card
Memory
, , keys to align
INPUT key.
key not to delete.
The following menu appears.
The list appears as a pop-up window.
DS FLD
The selected device name and directory (memory:
/program) appear in the Device name, Directory display
column.
For the devices other than memory, root directory is
selected.
The operation message
The file is deleted.
The list display is closed.
150
4.2 Program Editing
List Sort
Close
update change
" "
Erase? (Y/N) appears.