Table of Contents
Advertisement
Preface
Table 4
MGX 8230 Edge Concentrator Documentation (continued)
Title
Cisco MGX Route Processor Module Installation and
Configuration Guide, Release 1.1
Release Notes for Cisco MGX 8230, MGX 8250, and
MGX 8850 (Release 1), Software Version 1.2.10 (PXM1)
Release Notes for Cisco MGX Route Processor Module
(RPM/B and RPM-PR) for Release 1.2.10 and Release 3
The documentation listed in
VISM product.
Table 5
Cisco VISM Related Documentation
Document
Cisco MGX 8850 Multiservice Switch Installation
and Configuration, Release 1.1.31
Cisco MGX 8800 Series Switch Command
Reference, Release 1.1.31
Cisco MGX 8250 Edge Concentrator Installation
and Configuration, Release 1.1.31
Cites MGX 8250 Multiservice Gateway Command
Reference, Release 1.1.31
Cisco MGX 8230 Edge Concentrator Installation
and Configuration, Release 1.1.31
Cisco MGX 8230 Multiservice Gateway Command
Reference, Release 1.1.31
1.1.32 Version Software Release Notes Cisco WAN
MGX 8850, 8230, and 8250 Software
Conventions
This publication uses the following conventions to describe commands:
•
•
•
This publication uses the following conventions to describe examples:
•
•
Release 3.0, Part Number OL-2521-01 Rev. D0, June 2004
Table 5
Bold type—indicates command names and user entry text.
Italic type—indicates arguments for which you supply values.
| |—vertical bars indicate optional arguments.
font—indicates terminal sessions and system display information.
Courier
font—indicates user entry.
Courier bold
Description
Describes how to install and configure the MGX Route Processor
Module (RPM/B and RPM-PR) in the MGX 8850, MGX 8250,
and MGX 8230 Release 1 switch. Also provides site preparation,
troubleshooting, maintenance, cable and connector specifications,
and basic Cisco IOS configuration information.
Provides new feature, upgrade, and compatibility information, as
well as known and resolved anomalies.
Provides new feature, upgrade, and compatibility information, as
well as known and resolved anomalies.
contain additional information related to the operation of the Cisco
Description
Cisco MGX 8850 shelf installation procedures—refer to the sections
describing the installation and configuration of the PXM1 card.
Cisco MGX 8800 shelf command line interface commands—refer to
the commands that apply to the PXM1 card.
Cisco MGX 8250 shelf installation procedures—refer to the sections
describing the installation and configuration of the PXM1 card.
Cisco MGX 8250 shelf command line interface commands—refer to
the commands that apply to the PXM1 card.
Cisco MGX 8230 shelf installation procedures—refer to the sections
describing the installation and configuration of the PXM1 card.
Cisco MGX 8230 shelf command line interface commands—refer to
the commands that apply to the PXM1 card.
Hardware and software feature upgrades for the Cisco MGX 8850,
MGX 8230, and MGX 8250.
Cisco VISM Installation and Configuration Guide
Conventions
xvii
Advertisement
Table of Contents
