Cisco Voice Interworking Services (VISM) Installation And Configuration Manual page 481

Chapter 5 CLI Commands
dspdnallips
To display all statistically provisioned IP addresses and externally resolved IP addresses for all domain
names configured on the current VISM card, use the dspdnallips command in the VoIP
switching/trunking and switched AAL2 PVC operating modes.
Syntax Description
This command has no arguments or keywords.
Command Modes VoIP switching/trunking and switched AAL2 PVC
Usage Guidelines
Follow standard CLI procedures for this command.
Examples
The following example shows that all statistically provisioned IP addresses and externally resolved IP
addresses for all domain names configured on the current VISM card are displayed:
dspdnallips
ResolutionIndex
---------------
Related Commands Command
adddn
adddnip
cnfdn
cnfdnssrvr
deldn
deldnip
dspdnips
dspdns
dspdnssrvr
Release 3.0, Part Number OL-2521-01 Rev. D0, June 2004
dspdnallips
DomainName
----------
2 callagent99
45 callagent99
70 callagent99
1 dns
Description
Adds a domain name (call agent name) and optionally configures the resolution type
of the domain name.
Adds the IP addresses for a domain name that you added by using the adddn
command.
Configures the resolution type of a specified domain name.
Designates a domain name as a DNS.
Deletes a domain name.
Deletes a statistically provisioned IP address of a domain name.
Displays all statistically provisioned and externally resolved IP addresses configured
for a specified domain name.
Displays the configuration data of all domain names of a call agent.
Displays the domain name of the configured DNS of the current VISM card.
IP Preference
--------------- ----------
nnn.nnn.nnn.nnx
nnn.nnn.nnn.nxn
nnn.nnn.nnn.xnn
nnn.nnn.nnx.nnn
Cisco VISM Installation and Configuration Guide
1
3
4
1
dspdnallips
5-337