Table of Contents
Advertisement
cnfcaspackage
in-package
Cisco VISM Installation and Configuration Guide
5-106
Package name to be used for persistent events observed on an incoming
telephony call. It can be one of the following values:
•
MS = PBX DID/DOD trunks and incoming or outgoing MF wink start
trunks
•
DT = DTMF and dial pulse
•
MD = North American MF Feature Group D EANA and EAIN
•
MO = FGD Operator Services Signaling outgoing trunks only
BL = DTMF and dial pulse
•
L = Line
•
H = Handset
•
Basic = It can be one of the following:
•
G—generic
–
–
D—DTMF
–
M—MF
–
T—Trunk
–
L—Line
H—Handset
–
R—RTP
–
A—Announcement Server
–
Script—Script
–
If you set the package to anything other than basic on an endpoint with
Note
this command, persistent events observed on that endpoint are encoded
as an event in that package if the event is defined in that package, or
dropped if they are not defined in that package. Packages N and S are
not supported.
Chapter 5
1
trunks (except basic PBX)
1
basic PBX trunks
Release 3.0, Part Number OL-2521-01 Rev. D0, June 2004
CLI Commands
Advertisement
Table of Contents
