Cisco Voice Interworking Services (VISM) Installation And Configuration Manual page 615

Chapter 5 CLI Commands
dspxgcpdetailcnt
To display Simple Gateway Control Protocol (SGCP)/Media Gateway Control Protocol (MGCP) details
of message statistics exchanged between VISM and a specified call agent, use the dspxgcpdetailcnt
command in the VoIP switching/trunking operating mode.
Syntax Description
ca-ip-address
Command Modes VoIP switching/trunking
Usage Guidelines
Follow standard CLI procedures for this command.
Examples
The following example shows that the SGCP/MGCP details of message statistics exchanged between
VISM and the call agent identified by the IP address are displayed:
dspxgcpdetailcnt 209.165.200.224
IP Address
CRCX Count
CRCX Fail Count
MDCX Count
MDCX Fail Count
DLCX Received Count
DLCX Received Fail Count
DLCX Sent Count
DLCX Sent Fail Count
RQNT Count
RQNT Fail Count
Notify Count
Notify Fail Count
Audit Endpoint Count
Audit Endpoint Fail Count
Audit Connection Count
Audit Connection Fail Count
RSIP Count
RSIP Fail Count
Related Commands Command
dspxgcpdetailcnts
Release 3.0, Part Number OL-2521-01 Rev. D0, June 2004
dspxgcpdetailcnt ca-ip-address
IP address of the call agent for which you want to display detailed exchanged
message statistics. It can be in dotted decimal format (nnn.nnn.nnn.nnn).
Description
Displays SGCP/MGCP details of message statistics exchanged between VISM
and all known call agents.
: 209.165.200.224
: 0
: 0
: 0
: 0
: 0
: 0
: 0
: 0
: 0
: 0
: 0
: 0
: 0
: 0
: 0
: 0
: 4
: 4
Cisco VISM Installation and Configuration Guide
dspxgcpdetailcnt
5-471