Table of Contents
Advertisement
Chapter 5
CLI Commands
delln
To delete a DS1 line on a VISM card, use the delln command in the VoIP switching/trunking, switched
AAL2 PVC, and AAL2 trunking operating modes.
Syntax Description
ds1-num
Command Modes
VoIP switching/trunking, switched AAL2 PVC, and AAL2 trunking
Usage Guidelines
You must delete endpoints and CCS channels from the line before the line can be deleted.
Examples
The following example shows that line number 4 is deleted:
delln 4
Related Commands
Command
addln
cnfln
dspln
dsplns
Release 3.0, Part Number OL-2521-01 Rev. D0, June 2004
delln ds1-num
Physical line number in the range from 1 to 8.
Description
Adds a T1 or E1 line to a VISM card.
Configures characteristics for a VISM card line.
Displays the characteristics of a specified VISM card line.
Displays the characteristics for all lines on a VISM card.
Cisco VISM Installation and Configuration Guide
delln
5-259
Advertisement
Table of Contents
