Table of Contents
Advertisement
Chapter 5
CLI Commands
clralmcnt
To clear the alarm counters and statistics on a specified VISM line, use the clralmcnt command in the
VoIP switching/trunking, switched AAL2 PVC, and AAL2 trunking operating modes.
Syntax Description
-ds1
line-num
Command Modes
VoIP switching/trunking, switched AAL2 PVC, and AAL2 trunking
Usage Guidelines
All counters are reset to 0 when you use this command.
Examples
The following example clears alarm counters and statistics from line 1:
clralmcnt -ds1 1
Related Commands
Command
clralmcnts
dspalmcnt
Release 3.0, Part Number OL-2521-01 Rev. D0, June 2004
clralmcnt -ds1 line-num
The mandatory line-num argument identifier.
Line number for which to clear alarm counters and statistics. In the range from 1 to 8.
Description
Clears all alarm counters and statistics on a VISM card.
Displays the alarm counters and statistics on a line.
Cisco VISM Installation and Configuration Guide
clralmcnt
5-53
Advertisement
Table of Contents
