Cisco Voice Interworking Services (VISM) Installation And Configuration Manual page 464

dspccschans
dspccschans
To display all channels that are configured as common channel signaling (CCS) channels, use the
dspccschans command in the VoIP switching/trunking, switched AAL2 PVC, and AAL2 trunking
operating modes.
Syntax Description
This command has no arguments or keywords.
Command Modes VoIP switching/trunking, switched AAL2 PVC, and AAL2 trunking
Usage Guidelines
Follow standard CLI procedures for this command.
Examples
The following example shows that all CCS configured channels are displayed:
dspccschans
ds0 If
Index
-------
10
Related Commands Command
addccs
delccs
dspccs
Cisco VISM Installation and Configuration Guide
5-320
dspccschans
Row Lcn Max Frame
Status Num
------ ----- ------------
active 36
Description
Adds a CCS channel (D channel) to a VISM card.
Deletes the association between a CCS (DS0) channel and its corresponding virtual
channel.
Displays the configuration data of a previously added CCS channel.
Size
300
Release 3.0, Part Number OL-2521-01 Rev. D0, June 2004
Chapter 5 CLI Commands