Table of Contents
Advertisement
Chapter 5
CLI Commands
dspcastimers
To display the currently configured channel associated signaling (CAS) timers for a specified endpoint,
use the dspcastimers command in the VoIP switching/trunking, switched AAL2 PVC, and AAL2
trunking operating modes.
Syntax Description
endpt-num
Command Modes
VoIP switching/trunking, switched AAL2 PVC, and AAL2 trunking
Usage Guidelines
Follow standard CLI procedures for this command.
Examples
The following example shows that the currently configured CAS timers for endpoint number 1 are
displayed:
dspcastimers 1
Ds0IfIndex:
CasOnHookMinMakeTime:
CasOffHookMinMakeTime:
CasWinkMinMakeTime:
CasWinkMaxMakeTime:
CasWinkBreakTime:
CasGlareTime:
CasGuardTime:
CasDialDelayTime:
CasFlashMinMakeTime:
CasFlashMaxMakeTime:
Release 3.0, Part Number OL-2521-01 Rev. D0, June 2004
dspcastimers endpt-num
Endpoint number for which you want to display the currently configured CAS
timers. It can be a value from one of the following ranges:
•
For template number 1:
–
–
–
For template number 2:
•
–
–
•
For template number 3:
–
–
–
For template number 4:
•
–
1
300
20
100
1000
20
500
800
500
300
900
For VISM, from 1 to 145
For VISM-PR T1, from 1 to 192
For VISM-PR E1, from 1 to 248
For VISM T1, from 1 to 192
For VISM E1, from 1 to 248
For VISM, from 1 to 120
For VISM-PR T1, from 1 to 192
For VISM-PR E1, from 1 to 248
For VISM-PR, from 1 to 144
Cisco VISM Installation and Configuration Guide
dspcastimers
5-313
Advertisement
Table of Contents
