Cisco Voice Interworking Services (VISM) Installation And Configuration Manual page 11

Table 1 Cisco MGX 8850 (PXM45) Multiservice Switch Release 3 Documentation
Table 2 MGX 8850 (PXM1) Multiservice Switch Release 1.2.10 Documentation
Table 3 MGX 8250 Edge Concentrator Release 1.2.10 Documentation
Table 4 MGX 8230 Edge Concentrator Documentation
Table 5 Cisco VISM Related Documentation
Table 3-1 Supported Codecs and Packetization Periods
Table 4-1 VISM Command Attributes-Log File, Card State, and Privilege Level
Table 4-2 Mandatory Initial VISM Configuration Command Sequence for All Operating Modes
Table 4-3 VISM/VISM-PR DS0 Density with Codec Support
Table 4-4 dspaal2profile Field Descriptions
Table 4-5 AAL2 Operating Mode Profiles
Table 4-6 VISM 3.0 Built-in (Preconfigured) Tone Plans
Table 4-7 VISM/VISM-PR and MGX 8000 Series Switch Support
Table 4-8 Announcement File System Feature CLI Commands
Table 4-9 MGCP 1.0 Feature CLI Commands
Table 4-10 RSVP-Based Admission Control Feature CLI Commands
Table 11 VISM/VISM-PR DS0 Density with Codec Support
Table 5-1 Tone Plan Definition File Syntax
Table 5-2 Codec Type Default Values
Table 5-3 VISM Release 2.2(0) Built-in Tone Plans
Table 6-1 VISM T1 and E1 Card Alarms
Table A-1 Revertive/Nonrevertive Clocking and PXM Back Card Support
Release 3.0, Part Number OL-2521-01 Rev. D0, June 2004
xvi
xvii
3-4
4-17
4-39
4-40
4-57
4-60
4-64
4-66
4-67
4-70
5-46
5-153
5-442
6-5
Cisco VISM Installation and Configuration Guide
T A B L E S
xiv
xv
xvi
4-2
4-7
A-5
xi