Table of Contents
Advertisement
Chapter 5
CLI Commands
addannpermanent
To configure an announcement server file and associated codec type as permanent, use the
addannpermanent command in the VoIP switching operating mode.
Syntax Description
ann-index
ann-filename
ann-codec-type
Command Modes
VoIP switching
Usage Guidelines
The G.723.1 codecs are supported for VISM-PR cards and are not supported for VISM cards.
Examples
The following example shows that index server number 19 is configured with the femalezero1 file in the
G.726-40K codec:
addannpermanent 19 femalezero1 9
Release 3.0, Part Number OL-2521-01 Rev. D0, June 2004
addannpermanent ann-index ann-filename ann-codec-type
Announcement file server index number which you assign to identify a
permanent announcement server file. It can be in the range from 1 to 125.
Announcement filename. It can be from 1 to 64 alphanumeric characters,
including the following symbols—period (.), forward slash (/), underscore
(_), and hyphen (-).
Announcement filename associated codec. It can be one of the following
values:
•
1 = G.711u
2 = G.711a
•
3 = G.726-32k
•
4 = G.729a
•
5 = G.729ab
•
•
7 = G.726-16k
•
8 = G.726-24k
•
9 = G.726-40k
11 = G.723-H
•
12 = G.723.1a-H
•
13 = G.723.1-L
•
14 = G.723.1a-L
•
Cisco VISM Installation and Configuration Guide
addannpermanent
5-3
Advertisement
Table of Contents
