Table of Contents
Advertisement
Chapter 5
CLI Commands
cnfvbdpol
To configure VISM card level voiceband data (VBD) policies—fax/modem carrier loss and fax/modem
upspeed connection admission control (CAC) failure—use the cnfvbdpol command in the VoIP
switching/trunking, switched AAL2 PVC, and AAL2 trunking operating modes.
Syntax Description
carrier-loss-pol
cac-reject-pol
Command Modes
VoIP switching/trunking, switched AAL2 PVC, and AAL2 trunking
Usage Guidelines
Follow standard CLI procedures for this command.
Examples
The following example shows that the current VISM card reverts to the previous codec for fax/modem
carrier loss events and maintains the connection during upspeed CAC failure events:
cnfvbdpol 1 2
Related Commands
Command
dspvbdpol
Release 3.0, Part Number OL-2521-01 Rev. D0, June 2004
cnfvbdpol carrier-loss-pol cac-reject-pol
Carrier loss policy. It can be one of the following values:
•
1 = Revert to the previous codec
2 = Maintain the upspeed codec
•
CAC rejection policy. It can be one of the following values:
•
1 = Delete the connection
•
2 = Maintain the connection
Description
Displays the current VISM card level policies for fax/modem upspeed CAC
failure and fax/modem carrier loss for call events.
Cisco VISM Installation and Configuration Guide
cnfvbdpol
5-227
Advertisement
Table of Contents
