Table of Contents
Advertisement
Chapter 5
CLI Commands
addsesgrp
To add a PRI backhaul session group between a VISM card and a call agent, use the addsesgrp command
in the VoIP switching/trunking and switched AAL2 PVC operating modes.
Syntax Description
group-num
set-num
mgc-name
Command Modes
VoIP switching/trunking and switched AAL2 PVC
Usage Guidelines
Specify the following:
•
•
Examples
The following example shows that the PRI backhaul session group 2 is added between the VISM card
and the Jack call agent to session set number 1:
addsesgrp 2 1 Jack
Related Commands
Command
delsesgrp
Release 3.0, Part Number OL-2521-01 Rev. D0, June 2004
addsesgrp group-num set-num mgc-name
Identifying session group number in the range from 1 to 16.
In the range from 1 to 8.
Currently, only session set number 1 is supported.
Note
Domain name of the call agent, a text string from 1 to 64 alphanumeric characters.
The set number to which the group belongs.
The call agent the group's sessions are to be associated.
Description
Deletes a PRI backhaul session group.
Cisco VISM Installation and Configuration Guide
addsesgrp
5-43
Advertisement
Table of Contents
