Table of Contents
Advertisement
cnfdnssrvr
cnfdnssrvr
To designate a domain name as a domain name server (DNS), use the cnfdnssrvr command in the VoIP
switching/trunking, switched AAL2 PVC, and AAL2 trunking operating modes.
Syntax Description
dns-domain-name
Command Modes
VoIP switching/trunking, switched AAL2 PVC, and AAL2 trunking
Usage Guidelines
You must configure the domain name for internal-only resolution and provision at least one IP address
for the domain name.
Examples
The following example shows that the callagent99 domain name is configured as the DNS:
adddn 1 callagent99 1
adddnip 1 callagent99 209.165.200.224
cnfdnssrvr callagent99
Related Commands
Command
adddn
adddnip
cnfdn
deldn
deldnip
dspdnallips
dspdnips
dspdns
dspdnssrvr
Cisco VISM Installation and Configuration Guide
5-138
cnfdnssrvr dns-domain-name
Domain name which you want to designate, or remove, as a DNS. It can be one
of the following:
•
A text string of 1 to 64 alphanumeric characters.
NULL = removes the configured DNS from VISM.
•
NULL is case sensitive.
Note
Description
Adds a domain name (call agent name) and optionally configures the resolution
type of the domain name.
Adds the IP addresses for a domain name that you added by using the adddn
command.
Configures the resolution type of a specified domain name.
Deletes a domain name.
Deletes a statistically provisioned IP address of a domain name.
Displays all statistically provisioned IP addresses and externally resolved IP
addresses for all domain names configured on the current VISM card.
Displays all statistically provisioned and externally resolved IP addresses
configured for a specified domain name.
Displays the configuration data of all domain names of a call agent.
Displays the domain name of the configured DNS of the current VISM card.
Chapter 5
Release 3.0, Part Number OL-2521-01 Rev. D0, June 2004
CLI Commands
Advertisement
Table of Contents
