Table of Contents
Advertisement
dspannreqtimeout
dspannreqtimeout
To display the expiration time for announcements to begin playing before being aborted, use the
dspannreqtimeout command in the VoIP switching operating mode.
Syntax Description
This command has no arguments or keywords.
Command Modes
VoIP switching
Usage Guidelines
Follow standard CLI procedures for this command.
Examples
The following example shows that the announcements must begin playing by 12 seconds or they will be
aborted:
dspannreqtimeout
Annoucement Req Timeout: 12 seconds
Related Commands
Command
addannpermanent
cnfannagetime
cnfanndn
cnfannpathprefix
cnfannprefcodec
cnfannreqtimeout
delannalldynamic
delanndynamic
delannpermanent
dspannagetime
dspanncache
Cisco VISM Installation and Configuration Guide
5-302
dspannreqtimeout
Description
Configures an announcement server file and associated codec type as
permanent.
Configures the time that a nonpermanent announcement is to remain valid after
it is placed into the VISM announcement cache.
Designates an announcement file server domain name.
Designates the main prefix directory TFTP path from which to retrieve
announcement files from the announcement file server.
Configures the codec type used for announcements played on unconnected
TDM endpoints.
Configures the expiration time for announcements to begin playing after the
VISM receives the announcement signal (request) from the call agent.
Deletes all announcement files and their associated codec types from the
temporary announcement files currently saved in the VISM card.
Deletes an announcement file and associated codec type from the temporary
announcement files currently saved in the VISM card.
Deletes a permanent announcement file and its associated codec type from the
announcement file server.
Displays the time that a nonpermanent announcement is to remain valid after it
is placed into the VISM announcement cache.
Displays all available temporary announcement file names, and associated age
times before being refreshed from the announcement file server.
Chapter 5
Release 3.0, Part Number OL-2521-01 Rev. D0, June 2004
CLI Commands
Advertisement
Table of Contents
