Table of Contents
Advertisement
dsptoneprovplans
dsptoneprovplans
To display all provisional tone plans, use the dsptoneprovplans command in the VoIP
switching/trunking and switched AAL2 PVC operating modes.
Syntax Description
This command has no arguments or keywords.
Command Modes
VoIP switching/trunking and switched AAL2 PVC
Usage Guidelines
This command displays the status of tone plans in the following ways:
•
•
•
Examples
The following example shows that all provisional tone plans are displayed:
dsptoneprovplans
Status
---------
configure
.
.
.
Number of Provisionable Tone Plans = 1.
Number of un-configured Tone Plans = 31.
Related Commands
Command
addtoneplan
cnflnringback
cnflntoneplan
cnflntonetimeout
dellntoneplan
deltoneplan
dsplnringback
dsplntoneplan
dsplntonetimeout
Cisco VISM Installation and Configuration Guide
5-448
dsptoneprovplans
Configure—Downloaded properly and added to the system.
Lost File—Not downloaded properly or for a tone plan that is not the proper one.
Reloading—Currently downloading.
Tone Plan Region
----------------
singapore
Description
Adds a tone plan to the current VISM card.
Configures the ringback tone method for a specified line on the current VISM
card.
Assigns a tone plan to a specified VISM card line.
Modifies the timeout periods of all call progress tones supported by VISM on
a specified VISM card line.
Deletes the tone plan configuration of a specified VISM card line.
Deletes a previously added tone plan from the current VISM card.
Displays the ringback tone method for a specified line on the current VISM
card.
Displays the tone plan configuration of a specified VISM card line.
Displays the configured timeout periods for all call progress tones of a
specified VISM card line.
Version
Tone Plan File Name
-------
-------------------
11
sing_3
Release 3.0, Part Number OL-2521-01 Rev. D0, June 2004
Chapter 5
CLI Commands
Advertisement
Table of Contents
