Cisco Voice Interworking Services (VISM) Installation And Configuration Manual page 271

Chapter 5 CLI Commands
Usage Guidelines
Follow standard CLI procedures when using this command.
Examples
The following example shows that an LCN 160 connection is configured as CBR, with a peak cell rate
of 20000 cps, a sustained cell rate of 5000 cps, and a maximum burst rate of 10000 cps:
cnfcon 160 20000 1 5000 10000
Related Commands Command
addcon
delcon
dspvismparam
Release 3.0, Part Number OL-2521-01 Rev. D0, June 2004
Description
Adds a PVC connection between a VISM card and any SM or PXM card.
Deletes a PVC connection between a VISM card and an MGX 8000 Series
platform PXM card.
Displays the current VISM card configuration.
Cisco VISM Installation and Configuration Guide
cnfcon
5-127