Table of Contents
Advertisement
Chapter 5
CLI Commands
dspcasvar
To display data about channel associated signaling (CAS) variants for a given variant name, use the
dspcasvar command in the VoIP switching/trunking operating mode.
Syntax Description
var-name
Command Modes
VoIP switching/trunking
Usage Guidelines
Follow standard CLI procedures for this command
Examples
The following example shows that the CAS variant data for the CAS variant identified by the name first
is displayed:
dspcasvar first
CasVariantName:
CasFileName:
Ringing time:
Digit method:
Partial dial timing:
Critical dial timing:
Interdigit timeout:
CasVariantState:
CasRowStatus:
Country code:
Related Commands
Command
addcasvar
cnfcasvar
delcasvar
Release 3.0, Part Number OL-2521-01 Rev. D0, June 2004
dspcasvar var-name
Name of the CAS variant; a text string of 1 to 64 alphanumeric characters.
first
wink.dod
30
DTMF
16
4
1
configured
Add
US
Description
Adds a CAS variant to a VISM card.
Configures CAS variant and CAS timing parameters for a variant already created
with the addcasvar command.
Deletes a CAS variant.
Cisco VISM Installation and Configuration Guide
dspcasvar
5-315
Advertisement
Table of Contents
