Table of Contents
Advertisement
Chapter 5
CLI Commands
dspcds
To display a list of chassis card types, with associated slot numbers, card status, alarm status, and
redundancy status, use the dspcds command in the VoIP switching/trunking, switched AAL2 PVC, and
AAL2 trunking operating modes.
Syntax Description
This command has no arguments or keywords.
Command Modes
VoIP switching/trunking, switched AAL2 PVC, and AAL2 trunking
Usage Guidelines
Follow standard CLI procedures for this command.
Examples
The following example shows that the list of chassis card types, with associated status data, are
displayed:
dspcds
Slot
----
1.1
1.2
.
.
.
1.32
Related Commands
Command
dspcd
version
Release 3.0, Part Number OL-2521-01 Rev. D0, June 2004
dspcds
CardState
CardType
---------
--------
Empty
Active
VISM-8T1
Active
VISM-8E1
Description
Displays the current VISM card's configuration, status, and hardware and firmware
configuration data.
Displays version-related information for a VISM card.
CardAlarm
Redundancy
---------
----------
Clear
Clear
Clear
Cisco VISM Installation and Configuration Guide
dspcds
5-323
Advertisement
Table of Contents
