Table of Contents
Advertisement
cnfclksrc
•
•
•
Refer to the Cisco MGX 8850 Installation and Configuration Guide and the Cisco MGX 8000 Series
Switch Command Reference for information on the following PXM card clocking commands:
•
•
•
•
•
•
•
Examples
The following example shows that the clock source is configured for slot number 8, port number 35, and
is secondary:
cnfclksrc 8.35 s
Related Commands
Command
cnfln
Cisco VISM Installation and Configuration Guide
5-116
If the clock source is the PXM's internal crystal and no other clock source has been specified, do
not configure the clock source. The crystal is the automatic default.
If you want to change the clocking source from external to the PXM card's internal crystal, specify
the configuration as:
cnfclksrc 7.X n
Type 7 for the slot number regardless of the PXM card's location in the chassis. The X
Note
argument value is the either 35 or the OC3 port number, depending upon which is the
currently specified source. The null port number argument value cancels the previous
configuration and returns the clocking source to the default internal crystal.
If the clock source is from a line on a VISM card, specify the configuration as:
cnfclksrc Y.1 p
The Y argument value is the actual slot number of the VISM card. Always type 1 for port
Note
argument value, which represents the line number in this configuration.
cnfcbclk
cnfextclk
cnfsrmclksrc
dspcbclk
dspclkinfo
dspclksrc
dspcurclk
Description
Configures line characteristics for a specified line.
Chapter 5
Release 3.0, Part Number OL-2521-01 Rev. D0, June 2004
CLI Commands
Advertisement
Table of Contents
