Cisco Voice Interworking Services (VISM) Installation And Configuration Manual page 221

Voice interworking service module release 3.0
Table of Contents

Advertisement

Chapter 5
CLI Commands
cnfanndn
To designate the announcement file server domain name, use the cnfanndn command in the VoIP
switching operating mode.
Syntax Description
ann-domain-name
Command Modes
VoIP switching
Usage Guidelines
You must add the announcement file server name as a regular node name using the VISM XDNS
commands before you use this command.
Examples
The following example shows that the announcement file server is configured with the name
announceserver3:
cnfanndn announceserver3
Related Commands
Command
addannpermanent
cnfannagetime
cnfannpathprefix
cnfannprefcodec
cnfannreqtimeout
delannalldynamic
delanndynamic
delannpermanent
Release 3.0, Part Number OL-2521-01 Rev. D0, June 2004
cnfanndn ann-domain-name
The announcement file server domain name. In the range from 1 to 64
alphanumeric characters. You may also use forward slashes (/), backward
slashes (\), periods, hyphens, and underscores when creating an
announcement file server domain name.
Note
Do not use forward slashes (/) or hyphens as the last character in an
announcement file server name. Do not use spaces in an
announcement file server domain name.
Description
Configures an announcement server file and associated codec type as
permanent.
Configures the time that a nonpermanent announcement is to remain valid after
it is placed into the VISM announcement cache.
Designates the main prefix directory TFTP path from which to retrieve
announcement files from the announcement file server.
Configures the codec type used for announcements played on unconnected
TDM endpoints.
Configures the expiration time for announcements to begin playing after the
VISM receives the announcement signal (request) from the call agent.
Deletes all announcement files and their associated codec types from the
temporary announcement files currently saved in the VISM card.
Deletes an announcement file and associated codec type from the temporary
announcement files currently saved in the VISM card.
Deletes a permanent announcement file and its associated codec type from the
announcement file server.
Cisco VISM Installation and Configuration Guide
cnfanndn
5-77

Advertisement

Table of Contents
loading

This manual is also suitable for:

Vism 3.0

Table of Contents