Table of Contents
Advertisement
Chapter 5
CLI Commands
chkflash
To verify the integrity of a VISM card's flash memory, use the chkflash command in the VoIP
switching/trunking, switched AAL2 PVC, and AAL2 trunking operating modes.
Syntax Description
This command has no arguments or keywords.
Command Modes
VoIP switching/trunking, switched AAL2 PVC, and AAL2 trunking
Usage Guidelines
Follow standard CLI procedures for this command.
Examples
The following example verifies the current VISM card's flash memory:
chkflash
Related Commands
There are no related commands.
Release 3.0, Part Number OL-2521-01 Rev. D0, June 2004
chkflash
Cisco VISM Installation and Configuration Guide
chkflash
5-51
Advertisement
Table of Contents
